Optional Accessories - Gastroback DESIGN MULTI JUICER DIGITAL Operating Instructions Manual

OPTIONAL ACCESSORIES

Problem
The glass jug is lea-
king. Water is accu-
mulating under the
blade assembly.
You cannot lock the
blade assembly on
the motor base. The
glass jug / grinding
cup is wobbling on
the motor base.
120
Reason The Solution
The threads of the Completely unscrew the blade assembly. Then position the
blade assembly and blade assembly newly for screwing it onto the glass container.
glass jug have been Ensure to mount the blade assembly without tilting the thread
tilted. to avoid leakage and damage to the thread (See: 'Assembling
the Glass Jugs').
The sealing ring Before turning the blade assembly onto the glass container,
is missing or not ensure to place a sealing ring in correct orientation into the
inserted correctly. groove at the inner rim of the blade assembly. The ridged side
of the sealing ring must face upwards (See: 'Assembling the
Glass Jugs').
The junction bet- Try to turn on the blade assembly a little more tightly. Due to
ween blade assem- the sealing ring, there is a firm resistance when screwing on the
bly and glass jug is blade assembly.
not screwed on as
tight as necessary.
The sealing surface Replace the glass jug. Do not use any chipped or cracked glass
of the glass jug is parts for preparing food to avoid injuries due to splinters in your
chipped or broken. food!
The sealing ring is The sealing ring must be in proper working order. There may
damaged. be no tears, cracks, or brittle or worn out parts. Replace the
sealing ring.
There are residues Clean all sealing surfaces thoroughly, removing all dried-on
of food sticking to crusts and residues of food (see: 'Cleaning the Optional Acces-
the sealing surfaces sories').
of the glass jug,
sealing ring, or bla-
de assembly.
The coupling at Without pressure, turn the blade assembly over the drive cou-
the bottom of the pling of the motor base to and fro, until the blade assembly
blade assembly did
slides down and comes to a stable stand without any gap. Then
not slide onto the turn the blade assembly clockwise to lock it (see: 'Processing
drive coupling of the Your Food').
motor base.