Before First Use; Mounting The Juicing System - Gastroback DESIGN MULTI JUICER DIGITAL Operating Instructions Manual

BEFORE FIRST USE

WARNING: DO NOT let children play with the appliance or any part of
it! The knives of the juicing sieve are very sharp! Always use special care when
handling the juicing sieve. Only hold the juicing sieve by the rim. Always unplug
the appliance before cleaning or moving it, before assembling or disassembling
any parts, and when the appliance is not in use. Do not place or immerse the
motor base or power cord in water or other liquids or spill any liquids on the motor
base. Do not use any abrasive or corrosive cleaners for cleaning to avoid damage
to the surfaces. Do not place the motor base in an automatic dishwasher.
For operation, always unwind the power cord completely (approx. 110 cm) to
avoid overheating and risk of fire and electric shock!
1. Unpack the appliance and all parts carefully. Handle the juicing sieve with spe-
cial care, because the integrated knives are very sharp. Check that no parts are
damaged or missing (see: 'Knowing Your New Multi Juicer').
2. Carefully remove all packaging, shipping materials, stickers, and promotional
materials. However, DO NOT remove the model label or warning labels.
3. Before first use and after an elongated period of storage, clean all parts of the
appliance (see: 'Care and Cleaning'). Take the power cord completely out of
the cord storage in the baseplate of the motor base. Push the power cord into
the guiding groove at the rear part of the baseplate.
4. Position the motor base with the display facing towards you on the designated
working place near an appropriate wall power outlet. The locking arm must be
lowered to the horizontal open position.
Important: When operating the appliance for the first time, there may be a slight
burnt smell from the motor. There is no need for concern. However, if the problem
persists even after repeated use, get in contact with an authorized service centre.
66

MOUNTING THE JUICING SYSTEM

1. Place the pulp container tightly against the left side of the motor base. The pulp
container protrusion at the baseplate of the motor base must slide completely into
the groove at the bottom of the pulp container.
Important: Ensure that the exterior of the juice collector is clean and dry, before
mounting it on the motor base to avoid that residues of food and liquids get into
the motor base and/or clog the safety interlocks.
2. Place the juice collector on the motor base with the juice spout facing to the
locking arm. Make the juice spout slide into the spout groove and the pulp gut-
tering into the pulp container. Ensure that the drip-stop of the juice spout is turned
to the open position: the dark bar at the stainless steel sleeve of the juice spout
will be facing towards you.
CAUTION:
The knives of the juicing sieve are very sharp. Hold the juicing
sieve at the rim.
3. Insert the juicing sieve into the centre of the juice collector and press it down
without violence to lock it to the drive rotor. If required, turn the juicing sieve to
and fro to achieve the correct orientation before pressing it down.
4. With the pulp spout sliding into the pulp container, place the juicer cover onto
the juice collector and press it down slightly without violence until it settles firmly
on the juice collector. There may be no gap between the juicer cover and the
juice collector.
5. Carefully lift the locking arm up to the vertical closed position by pushing the
locking arm onto the support on the juicer cover until it tangibly engages. If atta-
ched correctly, the locking arm will be fixed in this position.
6. Place the juice jug under the juice spout. Then cover the juice jug with the desi-
gnated lid. The appliance is now ready for juicing.
Note
We recommend using the designated juice jug, because some juices may froth
and splash at the juice spout. In any case, by covering the juice jug with the
appropriate lid, you avoid that splashes will escape from the juice spout.
Tip: For juicing, you may place any sufficiently large jug, drinking glass or mug
under the juice spout. In this case, keep in mind that splashing could occur and
juices could run down at the exterior of the used vessel.
67