SPACE WALKER -
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
3 x 12mm
Secure
ITEM CODE: BH65-A.
Font view
Instruction Manual
MAIN GEAR INSTALATION.
PARTS REQUIRED
3 x 12mm
1. Assemble and mounting the wheel
pants as shown in the following pictures.
Mark point
2. A drop of C/A glue on the wheel collar
screws will help keep them from coming lose
during operation.
Repeat the process for the other wheel.
Secure.
13