Black Horse Model SPACE WALKER Instruction Manual Book page 15

SPACE WALKER -
HORIZONTAL STABILIZER INSTALLATION.
See pictures below:
Top side
Bottom side
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
ITEM CODE: BH65-A.
Cut the covering
away from the slot.
Temporary pin to
keep hinge centered.
Instruction Manual
See pictures below:

1. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Center line
 2 Using a modeling knife, cut away the cov-
ering from the fuselage for the stabilizer and
remove it.
Remove covering
 3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a felt-tip pen
Mark line.
Top side
15