Pepperl+Fuchs PCV F200-B16-V15 Series Manual page 13

PCV...-F200-B16-V15
Installation
Orientation of the Code Reel and Read Head
Figure 5.2
Position the code reel so that the www.pepperl-fuchs.com label and the position markings
are below the data matrix code. The position values then increase along the X-direction. The
diagram shows the orientation of a read head in the default position of 0°. The read head can
be configured in the interface for other installation situations.
Code Reels with a Starting Position of 0 m
Model Number
PCV6M-CA20-0
...
PCV100M-CA20-0
Code Reels with Different Starting Positions
Model Number
PCV100M-CA20-0
PCV100M-CA20-10000
...
PCV100M-CA20-990000
Caution!
Stop Edges
If you attach another code reel at the end of a previous code reel, the code pattern of 10 mm
must be retained.
Note!
Expansion Joints
If the system covers longer distances, expansion joints are integrated in the system structure.
We recommend creating breaks along the code reel. The resulting gaps should be 20 mm (2
code grids).
Y
Z
X
Description
Code reel, 2-track, length: 6 m
...
Code reel, 2-track, length: 100 m
Description
Code reel, 2-track, length: 100 m, starting
position: 0 m
Code reel, 2-track, length: 100 m, starting
position: 100 m
...
Code reel, 2-track, length: 100 m, starting
position: 9,900 m
13