C
5
HAPTER
FIGURE 3. RS1 Unit Installed on Cab Roof
3. Insert the tab of the RS1 latch mounting bracket into the slotted tab of the receiver mounting bracket to
interlock the brackets.
4. Secure the RS1 mounting bracket to the latch mounting bracket by securing the latch.
NOTE:
It may be necessary to adjust the latch in order to secure the RS1 unit.
INSTALL THE HYDRAULIC DRIVE UNIT (HDU)
1. Lift the instructional seat cushion.
FIGURE 4. HDU Installed
2. Align the holes of the HDU with the holes in the instructional seat compartment wall closest to the operator's
seat.
3. Secure the HDU to the instructional seat compartment wall using two M6 x 25 mm x 1.0 pitch hex bolts (P/N
311-0070-059).
24
Case IH Patriot 4440 Model Year 2017-2018 Raven RS1™ HDU Guidance and Steering Installation Manual