Chapter 5 Cab Component Installation; Install The Rs1 Unit - Raven RS1 Installation Manual

CHAPTER
5

INSTALL THE RS1 UNIT

FIGURE 1. Mounting Bracket Installed
1. Install the RS1 mounting bracket (P/N 107-0172-498) on the bottom of the RS1 unit using four 1/4"-20 x 1/2" flat
head machine screws (P/N 311-0003-041).
FIGURE 2. Machine's Existing Receiver Mounting Bracket
2. Install the RS1 mounting bracket (P/N 116-0159-803) on the front of the cab roof using the machine's existing
hardware.
NOTE: The RS1 mounting bracket should be installed so that the latch is on the left side.
016-5032-109 Rev. D
C AB COMPONENT
C H A P T E R 5
INSTALLATION
23