Lifetime PUMP ADJUST 90469 Assembly Instructions Manual page 28

SECTION 5 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
9/16" (14 mm)
(2)
5.4
• Slide the Link Cap (CKG) onto the Pump Adjust Link (CKM). Repeat this for the second Link, with the Link Cap fl ipped over.
CKG
5.5
• Secure the Pump Adjust Links (CKM) to the Pole Assembly using the hardware as shown.
6"
CKW (x1)
CKM
CKW
!
• Tighten the Centerlock Nut (BFI) until it is fl ush with
24
CKM
CKM
the end of the Bolt.
BFI (x1)
CKG
CKM
BFI