Lifetime PUMP ADJUST 90469 Assembly Instructions Manual page 19

SECTION 4 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3/4" (19 mm)
ANQ (x2)
(2)
11/16" (18 mm)
(1) ABP (x2)
AOR (x2)
ANP (x1)
(1)
4.6
• Rest the Rim on cardboard to prevent scratching, then secure the Lower Extension Arms (BGP) to the Backboard (AJI)
with the hardware shown. Screw the Nut Coupler (ANP) onto one of the Hex Bolts (ANQ), then onto the other. Center the
Coupler between the two Bolts as shown.
ABP
ANP ABP
ANQ ANQ
AOR
AOR
BGP BGP
ANQ
ANP
AOR
AJI
ANQ
ABP
AOR
!
• Make sure the 1/2" x 3/8" Poly Spacers (ABP) positioned between the
Lower Extension Arms and the Backboard do not bulge.
19