Lifetime PUMP ADJUST 90469 Assembly Instructions Manual page 10

SECTION 2 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
(1)
(1)
2.3
• THIS STEP CANNOT BE REVERSED!
cardboard fi ve to six times.
2.4
• After the Poles have been seated, measure up 1" from the bottom center of the Top Pole (ALH) and insert one
Self-Tapping Screw (CMV) into the Pole as shown.
Strike the end of the Pole Assembly on a piece of scrap wood or
!
6x
ALH
CMV (x1)
• Do not hit your feet with the Pole
sections, as serious injury could
occur.
WARNING
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface five to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
ALH
ALF
10
CMV
1" up from bottom of
Top Pole