Lifetime PUMP ADJUST 90469 Assembly Instructions Manual page 27

SECTION 5 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
1/2" (13 mm)
(2)
ACX (x1)
7/16" (11 mm)
(2)
CKZ (x1)
5.1
• Slide the Gas Spring Cover (AKG) onto the Gas Spring (AKF) as shown.
5.2
• Align the holes in the Gas Spring Cover (AKG) and the Gas Spring (AKF) with the holes in the Pole Bracket (ALL), and attach
the Gas Spring assembly to the Pole Bracket with the hardware shown.
5.3
• Connect the Gas Shock Rod (CKZ) to the Gas Spring in the location pictured using the hardware shown.
AKG
AKG
ACX
ALL
AKF
AEB
AEB
AAB
CKZ
AAO (x1)
AKF
AKF
AAO
!
• Tighten the Nylock Nut (AAO) until it is
fl ush with the end of the Bolt.
!
• DO NOT overtighten the hardware. The Gas Shock
Rod should move freely.
AAB
23
AEB (x2)
AAB (x2)
1/4"
1/4"