Lifetime PUMP ADJUST 90469 Assembly Instructions Manual page 16

SECTION 4 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
1/2" (13mm)
(1)
4.1
• Insert one end of the Tie Plate (BLC) into the slot on the Lower Extension Arm (BGP), then iInsert the opposite end of the
Tie Plate (BLC) into the slot on the other Lower Extension Arm (BGP) as shown.
BGP
4.2
• Secure the Lower Extension Arms (BGP) together with the hardware shown. Use a 1/2" Socket Wrench to screw the Thread-
Cutting Bolts (AQB) through the Lower Extension Arms and the Tie Plate (BLC).
AQB
BLC
BGP
1/2" (13 mm)
(1)
BLC
BGP
AAN
AQB (x2)
BLC
!
• Do not overtighten the Cap Nut. If the end of the Bolt breaks through the
plastic cap, call our Customer Service Department. Exposed threads on
the end of the Bolt may cause serious injuries.
16
AAN (x2)
BGP