Repair And Withdrawal From Use; Repair; Demontage And Withdrawal From Use - SaMASZ XT 390 Operator's Manual

10. REPAIR AND WITHDRAWAL FROM USE

10.1. Repair

CAUTION:
Prior to commencing repair works the mower should be disconnected from the
tractor.
Before repairing or assessing whether the mower is still serviceable, the machine should be
carefully cleaned of dirt, mud and plant remains.
After checking nuts and bolts, proper slack in joints and gears we can assess if the machine is
still serviceable. Worn out bolts, pegs, pins, discs, holders, knives etc. should be replaced.
Once the machine is repaired perform the following:
make sure that all elements are installed properly,
❑
install the removed guards,
❑
check whether screws and nuts are tightened,
❑
check proper slack in joints and in gears
❑
once all the guards are installed, perform a warm-up start to make sure the repaired machine
❑
operates properly.

10.2. Demontage and withdrawal from use

If the mower cannot be repaired anymore, it should be withdrawn from use. For this purpose oil
from the frame gearbox should be drained and thoroughly clean any excess oil with cleaning agent,
take parts made of plastic off. These should be used further on or delivered to a proper waste treatment
company. Upon completing the required activities machine should be sold to breaker's yard.
CAUTION:
When dismounting the machine pay particular attention to and additional
dangers, as crushing, cutting, wounding, concussion and abrasion. Use proper
tools and personal protective equipment: protective gloves, clothing and
footwear, eye wear, etc. Pay attention so that the machine works efficiently, and
thus it is required to secure the machine with supports.
40
XT REAR DISC MOWER
,
OPERATOR'S MANUAL