13 Adjust the sampling positions using Eye Finder. Be sure to expand "My
Bus 1" and use the recommended starting position noted on page 44.
Realign any stray channels if necessary. See page 46.
14 Determine pass or fail (1 of 2 tests). See page 47.
15 Select OK to close the "Analyzer Setup" window.
16 Switch to the Listing window by selecting the Listing tab at the bottom of
the main logic analyzer window.
17 Select the Run Repetitive icon
18 Determine pass or fail (2 of 2 tests). See page 49.
Test the complement of the bits (Pod 2, 250 Mb/s mode)
1 Test the complement of the bits. See page 50.
Chapter 3: Testing Logic Analyzer Performance
Test Pod 2 in 250 Mb/s Mode
.
53