Preparing Rake For Transport - SaMASZ UNO 410 Operator's Manual

OPERATOR'S MANUAL ROTARY RAKE
Fig. 6. Mounting rake on tractor with use of 3-point linkage beam

5.2. Preparing rake for transport

NOTE!
Switching the machine from working to transport position, and the other way
round can only be done on an even and stable ground. Prior to starting any works
make sure that nearby the machine there are no unauthorized persons exposed
to being crushed.
To prepare rake for transport:
Push the swath screen maximally in (if retracted), and then lock it,
❑
Lift safety guards up to transport position (vertical) and lock them with a pawl or fixing lock (Fig.
❑
7 and Fig. 8),
UNO
3
3 2
Support leg
Fig. 7. Lifting up and protecting guards with swath screen
Protective
guard
Fig. 8. Lifting up and protecting guards with swath screen
1
Lock
Fixing lock
Gear's
transport
locking
17