Danger Of Catching; Danger Of Wound, Abrasion And Damage Of Skin; Bans - SaMASZ UNO 410 Operator's Manual

OPERATOR'S MANUAL ROTARY RAKE

4.9.1. Danger of catching

This kind of risk occurs when the rake's position is changed, when operating near rotating parts,
operating without safety guards.
When operating, maintenance and regulation works are conducted always wear protective
gloves, footwear and clothing with no loose parts, belts, etc. Always comply with safety decals placed
on the rake.

4.9.2. Danger of wound, abrasion and damage of skin

Present when replacing working parts with sharp edges, cleaning the machine and removal of
any clogging and jams. For any repair and maintenance works always wear safety gloves.
NOTE:
Residual risk results from incorrect behaviour of the machine's operator.

4.9.3. Bans

Bear in mind the following bans when operating the rakes:
Do not unblock the rake, make any adjustments or repairs when the mower is operating.
❑
Never change the sequence of operation and maintenance works specified in the operator's manual.
❑
Never operate the rake when its working condition is poor or has safety guards damaged.
❑
Never get your limbs close to rake's rotating parts.
❑
During the rake's repair and maintenance works always comply with the descriptions included in
❑
the operator's manual, while conducting them with the tractor drive disconnected.
Prior to approaching any works, focus your attention solely on the tasks to do.
❑
Never operate the rakes being under influence of alcohol, drugs, or strong medicines.
❑
Wear clothing that is not too loose, nor too tight. Too loose clothing elements may be pulled in by
❑
the machine's rotating parts.
The rake cannot be operated by children nor handicapped people.
❑
When describing residual risk, the rake shall be considered a machine, which until the moment of
production launching had been designed and manufactured in accordance with top technology level
actual as per the machine manufacture date.
NOTE:
There is possibility of residual risk if not complying with specified instructions
and bans.
When the risk of being exposed to noise cannot be avoided or eliminated by any
group protective means or organization of work, employer (operator) must:
1) provide the operator with individual means of noise protection, if the noise
2) provide the operator with individual means of noise protection and supervise
level in work place exceeds 80 dB.
its proper use, if the noise level in work place reaches or exceeds 85 dB.
UNO
13