Chassis Maintenance; Adjusting The Cargo-Box Latches - Toro Workman MDX-D Operator's Manual

Figure 59
1. Engine bracket
2. Bumper
g017511
3. Bracket
4. Flange-head bolt

Chassis Maintenance

Adjusting the Cargo-Box
Latches
If the cargo-box latch is out of adjustment, the cargo
box vibrates up and down as you drive the machine.
You can adjust the latch posts to make the latches
hold the cargo box snugly to the chassis.
1. Loosen the locknut on the end of the latch post
(Figure 60).
1. Latch
2. Locknut
2. Rotate the latch post clockwise until it is snug
against the hook portion of the latch
3. Torque the locknut to 19.7 to 25.4 N∙m (175 to
225 in-lb).
4. Repeat this steps
the other side of the machine.
50
Figure 60
3. Latch post
(Figure
1 through 3 for the latch on
g002181
60).