Maintenance - Toro Workman MDX-D Operator's Manual

Operating on Rough Terrain
Reduce the ground speed of the machine and load
carried in the machine when operating on rough
terrain, uneven ground, and near curbs, holes, and
other sudden changes in terrain. Loads may shift,
causing the machine to become unstable.
WARNING
Sudden changes in terrain may cause abrupt
steering wheel movement, possibly resulting
in hand and arm injuries.
• Reduce your speed when operating on
rough terrain and near curbs.
• Grip the steering wheel loosely around the
perimeter keeping thumbs up and out of
the way of the steering wheel spokes.
Loading and Dumping
•
Do not exceed the rated weight capacity of the
machine when operating it with a load in the
cargo box, when towing a trailer, or both; refer to
Specifications (page
•
Use caution when operating the machine on a
hillside or on rough terrain, particularly with a load
in the cargo box or when towing a trailer or both.
•
Be aware that the stability and control of the
machine are reduced when the load in the cargo
box is poorly distributed.
•
Carrying oversized loads in the cargo box changes
the stability of the machine.
•
The steering, braking , and stability of the machine
are affected when carrying a load where the weight
of the material cannot be bound to the machine,
such as the liquid in a large tank.
WARNING
The weight of the box may be heavy. Hands
or other body parts could be crushed.
– Keep your hands and other body parts
clear when lowering the box.
– Do not dump materials on bystanders.
•
Never dump a loaded cargo box while the machine
is sideways on a hill. The change in weight
distribution may cause the machine to overturn.
•
When operating with a heavy load in the cargo
box, reduce your speed and allow for sufficient
braking distance. Do not suddenly apply the
brakes. Use extra caution on slopes.
•
Be aware that heavy loads increase your stopping
distance and reduce your ability to turn quickly
without tipping over.
17).
•
The rear cargo space is intended for load carrying
purposes only, not for passengers.
•
Never overload your machine. The name plate
(located under the middle of the dash) shows
the load limits for the machine. Never overfill
attachments or exceed the machine maximum
gross vehicle weight (GVW).

Maintenance

•
Before servicing or making adjustments to the
machine, shut off the engine, engage the parking
brake, and remove the key from the key switch to
prevent accidental starting of the engine.
•
Never work under a raised bed without placing the
bed safety support on the fully extended cylinder
rod.
•
Make sure that all hydraulic-line connectors are
tight and that all hydraulic hoses and lines are in
good condition before applying pressure to the
system.
•
Before disconnecting or performing any work on
the hydraulic system, relieve all pressure in the
system by shutting off the engine, cycling the
dump valve from raise to lower, and/or lowering
box and attachments. Place the remote hydraulics
lever in the float position. If the box must be in
raised position, secure it with the safety support.
•
To make sure that the entire machine is in good
condition, keep all nuts, bolts, and screws properly
tightened.
•
To reduce the potential fire hazard, keep the
engine area free of excessive grease, grass,
leaves, and accumulation of dirt.
•
If the engine must be running to perform a
maintenance adjustment, keep hands, feet,
clothing, and any parts of the body away from the
engine and any moving parts. Keep everyone
away.
•
Do not overspeed the engine by changing the
governor settings. The maximum engine speed is
3,650 rpm. To ensure safety and accuracy, have
an Authorized Toro Distributor check the maximum
engine speed with a tachometer.
•
If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
•
To be sure of optimum performance and safety,
always purchase genuine Toro replacement
parts and accessories. Replacement parts and
accessories made by other manufacturers could
be dangerous. Altering this machine in any
manner may affect the operation of the machine,
performance, durability or its use may result in
injury or death. Such use could void the product
warranty of The Toro® Company.
7