Maintenance; Recommended Maintenance Schedule(S) - Toro Workman MDX-D Operator's Manual

Maintenance

Note:
Download a copy of the electrical schematic by visiting www.Toro.com and search your machine from
the Manuals link.
Note:
Determine the left and right sides of the machine from the normal operating position.
Important:
Refer to your engine owner's manual for additional maintenance procedures.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
After the first 100 hours
Before each use or daily
Every 100 hours
Every 150 hours
Every 200 hours
Every 300 hours
Every 400 hours
Every 800 hours
Every 1,000 hours
Yearly
Maintenance Procedure
• Check the condition of the drive belt.
• Change the engine oil.
• Change the engine-oil filter.
• Perform the breaking in a new machine guidelines.
• Preform the pre-staring checks. Check the following items each time you begin
using the machine for the day:
• Check the brake-fluid level.
• Check the engine oil. Check the oil level in the engine before the engine is first
started.
• Check the tire pressure.
• Check gear-shift operation.
• Inspect the primary-drive clutch.
• Check the radiator-coolant level.
• Grease the bearings and bushings.
• Replace the air filter. Replace the air-filter element sooner if it dirty or damaged.
• Check the condition of the tires and rims.
• Torque the wheel-lug nuts.
• Inspect the steering and suspension for loose or damaged components.
• Check the front wheel toe-in and camber.
• Check the transaxle-fluid level.
• Check the operation of the Neutral gear-shift position.
• Clean the engine-cooling areas.
• Inspect the brakes.
• Change the engine oil (twice as often in special operating conditions; refer to .
• Change the engine-oil filter. Change the oil twice as often during special operating
conditions.
• Clean the primary-drive clutch (more often in dusty or dirty conditions).
• Adjust the parking brake if needed.
• Check the condition and tension of the drive belt.
• Grease the front wheel bearings.
• Inspect the fuel lines and connections.
• Replace the fuel filter.
• Change the transaxle fluid.
• Change the radiator coolant.
• Change the brake fluid.
• Complete all yearly maintenance procedures specified in the engine owner's manual.
27