Toro Workman MDX-D Operator's Manual page 38

Disconnecting the Battery
WARNING
Incorrect battery cable routing could damage
the machine and cables, causing sparks.
Sparks can cause the battery gasses to
explode, resulting in personal injury.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
• Always keep the battery strap in place to
protect and secure the battery.
WARNING
Battery terminals or metal tools could short
against metal machine components, causing
sparks. Sparks can cause the battery gasses
to explode, resulting in personal injury.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
1. Squeeze the sides of the battery cover and
remove the cover from the top of the battery
(Figure 40).
1. Positive battery terminal
2. Positive battery cable
3. Negative battery cable
4. Negative battery terminal
2. Disconnect the negative battery cable from the
terminal of the battery
3. Disconnect the positive battery cable from the
terminal of the battery
Removing the Battery
1. Disconnect the battery cables; refer to
Disconnecting the Battery (page
2. Remove the locknut, carriage bolt, and battery
clamp that secures the battery to the battery tray
(Figure 40).
3. Remove the battery from the battery tray
40).
38
Figure 40
5. Battery cover
6. Battery clamp
7. Locknut
8. Carriage bolt
(Figure 40).
(Figure 40).
38).
g024429
(Figure