Controls - Toro Workman MDX-D Operator's Manual

Controls

1. Steering wheel
2. Cup holder
3. Passenger handhold
4. Brake pedal
Figure 7
5. Accelerator pedal
6. Parking-brake handle
(center console)
7. Operator's Manual storage
tube
Accelerator Pedal
Use the accelerator pedal
speed of the machine. Pressing down the accelerator
pedal starts the engine. Pressing the pedal farther
increases ground speed. Releasing the pedal slows
the machine, and the engine shuts off.
Note:
The maximum forward speed is 26 km/h
(16 mph).
Brake Pedal
Use the brake pedal to stop or slow the machine
(Figure 7).
CAUTION
Operating a machine with worn or incorrectly
adjusted brakes can may result in personal
injury.
If brake pedal travels to within 25 mm (1 inch)
g027586
of the machine floor board, adjust or repair
the brakes.
Parking-Brake Lever
The parking-brake lever is located between the seats
(Figure 6 and Figure
engine, engage the parking brake to prevent the
machine from accidentally moving. To engage the
parking brake, pull up the parking-brake lever. To
disengage the parking brake, push the lever down. If
you park the machine on a steep grade, engage the
parking brake.
14
(Figure 7) to vary ground
7). Whenever you shut off the