Changing The Brake Fluid; Chassis Maintenance; Adjusting The Cargo-Box Latches - Toro Workman GTX Operator's Manual

Electric utility vehicle
Hide thumbs Also See for Workman GTX:
Table of Contents

Advertisement

Changing the Brake Fluid

Service Interval: Every 1,000 hours
Contact your authorized Authorized Toro Service
Dealer.

Chassis Maintenance

Adjusting the Cargo-Box
Latches
If the cargo-box latch is out of adjustment, the cargo
box vibrates up and down as you drive the machine.
You can adjust the latch posts to make the latches
hold the cargo box snugly to the chassis.
1.
Verify that the cargo box is latching.
Note:
If the cargo box does not latch, the
box-latch striker is likely too low. If the cargo box
latches, but vibrates up and down as you drive,
the box-latch striker is likely too high.
2.
Raise the cargo box;
the Dump Position (page
3.
Loosen the 2 bolts on the box-latch striker and
move the striker up or down, depending on if the
striker is too high or too low
1. Bolts
4.
Tighten the 2 bolts on the box-latch striker
(Figure
53).
5.
Verify that the adjustment is correct by latching
the cargo box several times.
45
Raising the Cargo Box to
19).
(Figure
53).
Figure 53
2. Box-latch striker
g034451

Advertisement

Table of Contents
loading

This manual is also suitable for:

0704107043

Table of Contents