Controls - Toro Workman GTX 07413LT Operator's Manual

Lithium utility vehicle
Table of Contents

Advertisement

Controls

Control Panel
1. Horn switch
2. Light switch
3. Display
4. Gear-shift selector
5. Key switch
Accelerator Pedal
Use the accelerator pedal
speed of the machine. Pressing down the accelerator
pedal starts the machine. Pressing the pedal farther
increases ground speed. Releasing the pedal slows
the machine, and the machine shuts off.
The maximum forward speed in performance mode is
26 km/h (16 mph) as shown in
The maximum forward speed in economy mode is 19
km/h (12 mph) as shown in
(Figure
6) to vary ground
Figure
16.
Figure
16.
Figure 6
6. Parking-brake lever
7. USB power point
8. Accelerator pedal
9. Brake pedal
Brake Pedal
Use the brake pedal to stop or slow the machine
(Figure
6).
CAUTION
Operating a machine with worn or incorrectly
adjusted brakes can may result in personal
injury.
If the brake pedal travels to within 25 mm (1
inch) of the machine floor board, adjust or
repair the brakes.
10
g377919

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman gtx 07413tc

Table of Contents