Toro Line Painter 1200 Service Manual page 75

3. Connect castor release cable to castor release det-
ent under front of machine (Figs. 9 and 10):
A. Secure cable clevis to castor release detent with
clevis pin and hair pin.
B. Position cable to chassis bracket.
C. Tighten cable jam nuts to allow castor detent to
completely disengage from front castor when castor
release lever on handle is pulled against handle.
D. Make sure that cable boot is positioned over end
of cable.
4. Secure high tension lead to spark plug.
Line Painter 1200
1. Castor release cable
2. Castor release lever
10
1. Cap screw
2. Flange nut
3. Flat washer
4. Torsion spring
5. Spacer
Page 6 – 11
2
4
3
4
Figure 9
3. Cable clevis
4. Jam nut
9
8
2
3
4
7 5
6
Figure 10
6. Detent
7. Flange bushing
8. Hair pin
9. Clevis pin
10. Castor release cable
Chassis and Controls
1
1