Troubleshooting - Toro Line Painter 1200 Service Manual

Troubleshooting

CAUTION
Remove all jewelry, especially rings and
watches, before
troubleshooting or testing.
Starting Problems
Problem
Engine will not start.
Engine will start, but will not
continue to run.
Electrical System
doing any electrical
Possible Causes
ON/OFF switch is in the OFF
position.
ON/OFF switch is faulty.
Ignition spark plug lead is not
connected to spark plug.
Electrical wires are loose or
damaged.
Engine is malfunctioning.
Electrical wires are loose or
damaged.
ON/OFF switch is faulty.
Engine is malfunctioning.
For effective troubleshooting and repairs, there must be
a good understanding of the electrical circuits and com-
ponents used on this machine (see Electrical Schematic
in this chapter).
NOTE: See the Kawasaki FJ180V Service Manual at
the end of Chapter 3 – Engine for troubleshooting of en-
gine electrical problems.
Page 4 – 4
Correction
Turn switch to ON.
Replace ON/OFF switch.
Connect high tension lead to spark
plug.
Check electrical connections.
Repair wiring.
See Kawasaki FJ180V Service
Manual at the end of Chapter 3 –
Engine.
Check electrical connections.
Repair wiring.
Replace ON/OFF switch.
See Kawasaki FJ180V Service
Manual at the end of Chapter 3 –
Engine.
Line Painter 1200