MacDon R116 Installation Instructions Manual page 4

List of Revisions
At MacDon, we're continuously making improvements, and occasionally these improvements affect product
documentation. The following list provides an account of major changes from the previous version of this document.
Summary of Change
Removed reference to R113 Rotary Disc Pull-Type. Kit
MD #259140 only applies to R116 Rotary Disc Pull-Type
(model years 2015–2017).
Corrected captions.
Revised description of NOTE.
Added a WARNING to the procedures for opening
cutterbar doors.
Added a step to the procedures for opening cutterbar
doors.
Added a DANGER and CAUTION to the procedure for
removing discblades.
Added two steps to the procedure for removing discblades.
Added an IMPORTANT to the procedures for removing and
installing discblades.
Regarding the four bolts that secure the driveline assembly
to the hub drive:
• Corrected the type of threadlocker required. The bolts
®
require Loctite 243 or equivalent, NOT Loctite
equivalent.
• Changed the torque value from 95 Nm (70 lbf·ft) to
102 Nm (75 lbf·ft).
Regarding the eight bolts used to secure the drum shields:
• Changed the torque value from 29 Nm (21 lbf·ft) to
27 Nm (20 lbf·ft)
Added a CAUTION to the procedure after the kit
installation.
214913
Location
Throughout.
Throughout.
1.1 Signal Words, page 1
• 3.1 Opening Cutterbar Doors – North America, page 9
• 3.2 Opening Cutterbar Doors – Export Latches, page 10
• Step
2, page 9
• Step
2, page 10
3.3 Removing Discblades and Attachment Hardware, page
12
• Step
1, page 12
• Step
2, page 12
• Step
5, page 12
• Step
3, page 22
• Step
9, page 19
• Step
10, page 19
®
242 or
Step 12, page 19
4 After Installation, page 25
ii
Revision B