Opening Cutterbar Doors - Export Latches - MacDon R116 Installation Instructions Manual

3.2 Opening Cutterbar Doors – Export Latches
Pull-types sold outside North America require a tool-operated latch on the cutterbar doors. Follow these steps to open
cutterbar doors with export latches:
WARNING
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key from ignition
before leaving operator's seat for any reason.
1. Center the pull-type beneath the hitch, if both doors need
to be opened.
2. Shut down the engine, and remove the key from the
ignition.
3. Locate latch access holes (A) for each door.
4. Use a rod or screwdriver to press down on latch (A) and
release the cutterbar door.
214913
INSTALLATION INSTRUCTIONS
Figure 3.2: Cutterbar Door Latch Access Hole –
Export Only
Figure 3.3: Cutterbar Door Latch – Cutaway View
10
A
A
Revision B