7. Slide driveline (A) downwards, and tilt it to the side. Pull
the driveline up and out of the drum.
NOTE:
For clarity, illustration shows a cutaway view of drum and
tube shield.
8. Inside the drum, use a 305 mm (12 in.) extension and
18 mm deep socket to remove four M12 bolts (A) and
washers holding the drum disc in place.
9. Remove and discard drum disc assembly.
214913
INSTALLATION INSTRUCTIONS
Figure 3.17: Driveline
Figure 3.18: Driven Drum – R116
17
A
A
1026214
Revision B