4. Remove one 20 mm M10 hex flange head bolt (A), two
16 mm M10 hex flange head bolts (B), and vertical
shield (C).
5. Remove eight M8 hex flange head bolts (A), and remove
two drum shields (B).
6. Remove four M12 hex flange head bolts (A) and spacers
securing driveline assembly (B) to hub drive (C). Retain for
reassembly.
214913
INSTALLATION INSTRUCTIONS
Figure 3.14: Vertical Shield
Figure 3.15: Drum Shields
Figure 3.16: Driven Drum
16
B
B
B
A
A
C
A
C
A
B
Revision B