MacDon R116 Installation Instructions Manual page 26

13. Position vertical shield (A) (MD #281981) on top of the
drum shields, covering the driveline, as shown. Apply a
bead of medium-strength threadlocker (Loctite
equivalent) around threads, and then use three 20 mm
M10 hex flange head bolts (B) and (C) (MD #152655) and to
secure the vertical shield in place.
14. Torque to 61 Nm (45 lbf·ft).
15. Position drum top (B) (MD #281489) and back plate (C)
(MD #281493) onto the drum as shown. Apply a bead of
medium-strength threadlocker (Loctite
around threads, and then use four M10 hex flange head
bolts (A) (MD #152655) to secure the drum top and back
plate in place.
16. Torque to 61 Nm (45 lbf·ft).
214913
INSTALLATION INSTRUCTIONS
®
243 or
Figure 3.24: Vertical Shield Installed
®
243 or equivalent)
Figure 3.25: Drum Top and Back Plate Installed
20
C
A
B
B
A
C
Revision B