Review / Describe The Access Point - US Robotics Instant802 APSDK Administrator's Manual

Review / Describe the Access Point

Field
IP Address
MAC Address
Firmware Version
Location
Description
The IP address assigned to this access point. This field is not editable because
the IP address is already assigned (either via DHCP, or statically through the
Ethernet (wired) settings as described in "Configuring Guest Interface Ethernet
(Wired) Settings" on page 95).
The MAC address of the access point.
A MAC address is a permanent, unique hardware address for any device that
represents an interface to the network. The MAC address is assigned by the
manufacturer. You cannot change the MAC address. It is displayed for infor-
mational purposes as a unique identifier for an interface.
The address shown here is the MAC address for the bridge (
address by which the access point is known externally to other networks.
To see MAC addresses for Guest and Internal interfaces on the access point,
go to the Status menu and view the Interface tab.
Version information about the firmware currently installed on the access point.
As new versions of the Professional Access Point firmware become available,
you can upgrade the firmware on your access points to take advantages of
new features and enhancements.
For instructions on how to upgrade the firmware, see "Upgrade" on page 172.
Specify a location description for this access point.
Professional Access Point
Administrator Guide
br0 ). This is the
Basic Settings - 37