US Robotics Instant802 APSDK Administrator's Manual page 208

Wired Interface Command
Set DNS Nameservers to Use Static IP Addresses (Dynamic to
Manual Mode)
Set DNS Nameservers to Use DHCP IP Addressing (Manual to
Dynamic Mode)
Get Summary View of Internal and Guest Interfaces
USR5453-AP# get bss
name
--------------------------------------------------------------------
wlan0bssInternal
wlan0bssGuest
Get the DNS Name
USR5453-AP# get host id
USR5453-AP
Set the DNS Name
USR5453-AP# set host id vicky-ap
bob# get host id
vicky-ap
Get Wired Internal Interface Settings
See "Get Current Settings for the Ethernet (Wired) Internal Interface" on page 200
Get Wired Guest Interface Settings
See "Get Current Settings for the Ethernet (Wired) Guest Interface" on page 201
Set Up Guest Access
Before configuring this feature, make sure you are familiar with the names of the interfaces as
described in "Understanding Interfaces as Presented in the CLI" on page
reference in a command determines whether a setting applies to a wired or wireless interface or to the
Internal or Guest network.
Configuring a Guest interface from the CLI is a complex task. Unless this is your area of expertise, you
may find it easier to use the Web User Interface to set up Guest Access. For information on how to set up
Guest Access from the Web User Interface, see
on page 121.
Before configuring guest or internal interface settings, make sure you are familiar the names of the
status radio beacon-interface
up wlan0 wlan0
down wlan0 wlan0guest
"Ethernet (Wired) Settings" on page 89
Professional Access Point
Administrator Guide
Example
See example below.
See example below.
mac
00:0C:41:16:DF:A6
under Status.
under Status.
190. The interface name you
Class Structure, Commands, and Examples - 208
and "Guest Login"