Enable/Configure Guest Login Welcome Page - US Robotics Instant802 APSDK Administrator's Manual

Enable/Configure Guest Login Welcome Page

Guest Welcome Option
View Guest Login Settings:
Enable/Disable the Guest
Welcome Page
Set Guest Welcome Page
Textl:
Guest Login settings are only relevant if you have first configured a Guest Network. For information
about configuring a Guest Network, see
You can set up a "captive portal" that Guest clients will see when they log on to the Guest network. or
modify the Welcome screen guest clients see when they open a Web browser or try to browse the Web.
View Guest Login Settings
To view the current settings for Guest Login:
USR5453-AP# get portal
Field
---------------------------------------------------------------------------
status
welcome-screen
welcome-screen-text
by this U.S. Robotics Corporation wireless AP. Upon clicking "Accept", you
will gain access to our wireless guest network. This network allows complete
access to the Internet but is external to the corporate network. Please note
that this network is not configured to provide any level of wireless
security.
Enable/Disable the Guest Welcome Page
To enable the Guest welcome page:
USR5453-AP# set portal status up
To disable the Guest welcome page:
USR5453-AP# set portal status down
Set Guest Welcome Page Text
To specify the text for the Guest welcome page:
USR5453-AP# set portal welcome-screen-text "Welcome to the Stephens Network"
Example
get portal
set portal status
set portal welcome-screen-text "Welcome Screen Text"
Where " Welcome Screen Text
want displayed on the Guest Welcome Web Page. The Welcome message must
be in quotes if it contains spaces, punctuation, and special characters."
"Set Up Guest Access" on page
Value
down
on
Thank you for using wireless Guest Access as provided
Professional Access Point
Administrator Guide
" is the content of the Welcome message you
208.
Class Structure, Commands, and Examples - 228