US Robotics Instant802 APSDK Administrator's Manual page 192

Basic Settings
Before configuring this feature, make sure you are familiar with the names of the interfaces as
described in "Understanding Interfaces as Presented in the CLI" on page
reference in a command determines whether a setting applies to a wired or wireless interface, or to the
Internal or Guest network.
The following CLI command examples correspond to tasks you can accomplish on the Basic Settings tab
of the Web User Interface for access points with clustering capabilities. In some cases, the CLI
command provides additional details not available through the Web User Interface.
This table shows a quick view of Basic Settings commands and provides links to detailed examples.
Basic Setting
Get the IP Address for the Internal Inter-
face on an Access Point
Get the MAC Address for an Access Point
Get Both the IP Address and MAC
Address
Get Common Information on All Interfaces
for an Access Point
Get the Firmware Version for the Access
Point
Get the Location of the Access Point
Set the Location for an Access Point
Get the Current Password
Set the Password
Get the Wireless Network Name
Example
get interface br0 ip
or
get interface
get interface
is a catch-all command that shows common information
on all interfaces for the access point such as IP addresses, MAC
addresses, and so on. The IP address for the Internal interface (and
the one used to access the access point) is that shown for br0. (See
"Understanding Interfaces as Presented in the CLI" on page
get interface br0 mac
get interface br0 mac ip
get interface
get system version
get cluster location
set system location NewLocation
For example:
set system location hallway
or
set system location
get system encrypted-password
set system password NewPassword
For example:
set system password admin
(SSID))
get interface wlan0 ssid
Professional Access Point
Administrator Guide
190. The interface name you
" Vicky's Office "
Class Structure, Commands, and Examples - 192
get
190)