US Robotics Instant802 APSDK Administrator's Manual page 110

.
Field
Transfer Key Index
Key Length
Key Type
Characters Required
WEP Keys
Description
Select a key index. Key indexes 1 through 4 are available. The default is 1.
The transfer key index indicates which WEP key the access point will use to encrypt
the data it transmits.
Specify one of the following lengths for the key:
• 64 bits
• 128 bits
Select one of the following key types:
• ASCII
• Hex
Indicates the number of characters required in the WEP key.
The number is updated automatically based on how you set
Type.
You can specify up to four WEP keys. In each text box, enter a string of characters
for one key.
If you selected ASCII, enter any combination of integers and letters
A-Z .
If you selected HEX, enter hexadecimal digits (any combination of
A-F ).
Use the same number of characters for each key as specified in the
Required field. These are the RC4 WEP keys shared with the stations using the
access point.
Each client must be configured to use one of these same WEP keys in the same
slot as specified here on the access point. (See "Rules to Remember for Static
WEP" on page 111.)
Professional Access Point
Administrator Guide
Key Length Key
and
0-9 , a-z , and
0-9 a-f
and or
Characters
Security - 110