US Robotics Instant802 APSDK Administrator's Manual page 277

rts-threshold
Purpose The size of frames at which RTS/CTS will be used.
Valid values 0-2347.
fragmentation-threshold
Purpose The size of frames at which they will be fragmented.
Valid values 256-2346.
load-balance-disassociation-utilization
Purpose The load that must be exceeded in order for a station to be disassociated. The condition for
load-balance-disassociation-stations must also be satisfied, if it is non-zero.
Valid values A non-zero percentage, or 0 to disable.
load-balance-disassociation-stations
Purpose The number of associated stations that must be exceeded for a station to be disassociated.
The condition for load-balance-disassociation-utilization must also be satisfied, if it is non-
zero.
Valid values 1-2007, or 0 to disable.
load-balance-no-association-utilization
Purpose The load that must be exceeded in order for new stations to be prohibited from associating.
Valid values A non-zero percentage, or 0 to disable.
ap-detection
Purpose Whether AP detection is performed. If on, the detected APs will be represented by instances
of the detected-ap class.
Valid values "on" or "off".
station-isolation
Purpose Whether stations are isolated. If on, then stations on this radio cannot exchange data with
other stations on this radio.
Valid values "on" or "off".
wme
Purpose Whether WME is enabled. Determines whether wme-queue values will be sent to clients.
Valid values "on" or "off".
wme_wifi_noack_test
Purpose Mode for Wi-Fi noack test.
Professional Access Point
Administrator Guide
Class and Field Reference - 277