US Robotics Instant802 APSDK Administrator's Manual page 193

Basic Setting
Set the Wireless Network Name (SSID)
Get the IP Address for the Internal Interface on an Access Point
In the following example, the IP address for the access point is: 10.10.55.216. Use the
shown to obtain the IP address for the Internal network.
USR5453-AP# get interface br0 ip
10.10.55.216
Get the MAC Address for an Access Point
In the following example, the MAC address for the access point is: 00:a0:c9:8c:c4:7e. Use the
command as shown to obtain the MAC address.
USR5453-AP# get interface br0 mac
00:a0:c9:8c:c4:7e
Get Both the IP Address and MAC Address
The following command returns both the IP address and the MAC address for an access point:
USR5453-AP# get interface br0 mac ip
Field Value
---------------------
ip 10.10.55.216
mac 00:a0:c9:8c:c4:7e
Get Common Information on All Interfaces for an Access Point
The following example shows common information (including IP addresses) for all interfaces.
USR5453-AP# get interface
name type
---------------------------------------------------------------------------
-----
lo
eth0
eth1
br0 bridge
255.255.255.0
brguest bridge
wlan0 service-set
wlan0guest service-set
wlan0wds0 wds
Example
set interface wlan0 ssid NewSSiD
For example:
set interface wlan0 ssid Vicky
set interface wlan0 ssid "Vicky's AP"
status mac
up 00:00:00:00:00:00
up 00:02:B3:01:01:01
down 00:02:B3:02:02:02
up 00:02:B3:01:01:01
down 00:00:00:00:00:00
up 00:0C:41:16:DF:A6
up
down
Class Structure, Commands, and Examples - 193
Professional Access Point
Administrator Guide
get
command as
get
ip mask
127.0.0.1 255.0.0.0
10.10.100.110