Cli Class And Field Overview - US Robotics Instant802 APSDK Administrator's Manual

dhcp-client
dot11
host
interface
ip-route
log
mac-acl
ntp
portal
radio
radius-user
ssh
system
telnet
tx-queue
wme-queue
• Example 5: Type "set
USR5453-AP# set mac-acl
• Example 6: Type "set
USR5453-AP# set cluster
cluster
cluster-member
Example 7: Type "add" TAB TAB (including a space after add) to get a list of all field options for the
•
command.
USR5453-AP# add
basic-rate
bridge-port
bss
interface
mac-acl
radius-user
supported-rate
Example 8: Type "remove" TAB TAB (including a space after remove) to get a list of all field options for
•
remove
the command
USR5453-AP# remove
basic-rate
bridge-port
bss
interface
ip-route
mac-acl
radius-user
supported-rate

CLI Class and Field Overview

The following is an introduction to the CLI classes and fields. For a complete reference guide, see
DHCP client settings
IEEE 802.11
Internet host settings
Network interface
IP route entry
Log settings
MAC address access list item
Network Time Protocol client
Guest captive portal
Radio
RADIUS user
SSH access to the command line interface
System settings
Telnet access to the command line interface
Transmission queue parameters
Transmission queue parameters for stations
mac" TAB, and the command will complete with the only matching option:
cluster" TAB TAB, and the two matching options are displayed:
Clustering-based configuration settings
Member of a cluster of like-configured access points
Basic rate of the radio
Bridge ports of bridge interfaces
Basic Service Set of the radio
Network interface
MAC address access list item
RADIUS user
Supported rate of the radio
Basic rate of the radio
Bridge ports of bridge interfaces
Basic Service Set of the radio
Network interface
IP route entry
MAC address access list item
RADIUS user
Supported rates of the radio
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 250
add
"Class