Enable/Disable Wi-Fi Multimedia - US Robotics Instant802 APSDK Administrator's Manual

QoS Command
About Access Point and Station EDCA
Parameters
Understanding the Queues for Access
Point and Station
Distinguishing between Access Point and
Station Settings in QoS Commands
Get QoS Settings on the Access Point
Get QoS Settings on the Client Station
Set Arbirtation Interframe Spaces (AIFS)
Setting Minimum and Maximum Conten-
tion Windows (cwmin, cwmax)
Set the Maximum Burst Length (burst) on
the Access Point
Set Transmission Opportunity Limit (txop-
limit) for WMM client stations

Enable/Disable Wi-Fi Multimedia

By default, Wi-Fi MultiMedia (WMM) is enabled on the access point. With WMM enabled, QoS settings on
the Professional Access Point control both downstream traffic flowing from the access point to client
station (access point EDCA parameters) and upstream traffic flowing from the station to the access point
(station EDCA parameters). Enabling WMM essentially activates station-to-access-point QoS control.
Disabling WMM will deactivates QoS control of "station EDCA parameters" on upstream traffic flowing from
Example
See "About Access Point and Station EDCA Parameters" on
page 240.
See "Understanding the Queues for Access Point and Station" on
page 240.
See ""Distinguishing between Access Point and Station Settings in
QoS Commands" on page
get tx-queue
get wme-queue
On the access point:
set wme-queue wlan0 with queue Queue_Name to
aifs AIFS_Value
On a client station:
set wme-queue wlan0 with queue Queue_Name to
aifs AIFS_Value
See examples in "Set Arbirtation Interframe Spaces (AIFS)" on
page 241
On the access point:
set tx-queue wlan0 with queue Queue_Name to
cwmin cwmin_Value cwmax cwmax_Value
On a client station:
set wme-queue wlan0 with queue Queue_Name to
cwmin cwmin_Value cwmax cwmax_Value
See examples in "Setting Minimum and Maximum Contention Win-
dows (cwmin, cwmax)" on page
set tx-queue wlan0 with queue Queue_Name to
burst burst_Value
See examples in "Set the Maximum Burst Length (burst) on the
Access Point" on page 243.
set wme-queue wlan0 with queue Queue_Name to
txop-limit txop-limit_Value
See examples in "Set Transmission Opportunity Limit (txop-limit) for
WMM client stations" on page
Class Structure, Commands, and Examples - 239
Professional Access Point
Administrator Guide
240.
242.
244.