US Robotics Instant802 APSDK Administrator's Manual page 214

access point. These settings correspond to those available in the Web User Interface on the Advanced
menu's Security tab. For a detailed discussion of concepts and configuration options,
page 101.
This section focuses on configuring security on the Internal network. (Security on the Guest network
defaults to None. See "When to Use No Security" on page
This table shows a quick view of Security commands and links to detailed examples.
Security Command
Get the Current Security Mode
Get Detailed Description of Current Secu-
rity Settings
Set the Broadcast SSID (Allow or Prohibit)
Enable / Disable Station Isolation
Set Security to None
Set Security to Static WEP
Set Security to IEEE 802.1x
Set Security to WPA/WPA2 Personal
(PSK)
Set Security to WPA/WPA2 Enterprise
(RADIUS)
Get the Current Security Mode
USR5453-AP# get interface wlan0 security
none
Get Detailed Description of Current Security Settings
USR5453-AP# get bss wlan0bssInternal detail
Field
---------------------------------------------
status
description
radio
beacon-interface
mac
dtim-period
max-stations
ignore-broadcast-ssid
mac-acl-mode
mac-acl-name
radius-accounting
102.)
Example
get interface wlan0 security
get bss wlan0bssInternal detail
get interface wlan0 detail
set bss wlan0bssInternal ignore-broadcast-ssid on
set bss wlan0bssInternal ignore-broadcast-ssid off
set interface wlan0 security plain-text
See detailed example in "Set Security to Static WEP" on page
See detailed example in"Set Security to IEEE 802.1x" on page
See detailed example in "Set Security to WPA/WPA2 Personal (PSK)"
on page 221.
See detailed example in "Set Security to WPA/WPA2 Enterprise
(RADIUS)" on page 223.
Value
up
Internal
wlan0
wlan0
00:0C:41:16:DF:A6
off
deny-list
wlan0bssInternal
Class Structure, Commands, and Examples - 214
Professional Access Point
Administrator Guide
see"Security" on
216.
219.