US Robotics Instant802 APSDK Administrator's Manual page 227

consumed such system time, amount of data transmitted and received, and so on.
RADIUS accounting is not supported by the built-in server, so if you are using the built-in server make
sure that RADIUS accounting is off.
To enable RADIUS accounting:
To disable RADIUS accounting:
For this example, you will enable RADIUS accounting for your external RADIUS server:
USR5453-AP# set bss wlan0bssInternal radius-accounting on
8. Get Current Security Settings After Re-Configuring to WPA/WPA2 Enterprise (RADIUS)
Now you can use the "get" command again to view the updated security configuration and see the results
of your new settings.
The following command gets the security mode in use on the Internal network:
USR5453-AP# get interface wlan0 security
wpa-enterprise
The following command gets details on how the internal network is configured, including details on
Security.
USR5453-AP# get bss wlan0bssInternal detail
Field
---------------------------------------------
status
description
radio
beacon-interface
mac
dtim-period
max-stations
ignore-broadcast-ssid
mac-acl-mode
mac-acl-name
radius-accounting
radius-ip
radius-key
open-system-authentication
shared-key-authentication
wpa-cipher-tkip
wpa-cipher-ccmp
wpa-allowed
wpa2-allowed
rsn-preauthentication
set bss wlan0bssInternal radius-accounting on
set bss wlan0bssInternal radius-accounting off
Value
up
Internal
wlan0
wlan0
00:0C:41:16:DF:A6
2
2007
off
deny-list
wlan0bssInternal
on
142.77.1.1
KeepSecret
on
off
on
off
on
off
off
Professional Access Point
Administrator Guide
Class Structure, Commands, and Examples - 227