Step 5. Configure Basic Settings And Start The Wireless Network - US Robotics Instant802 APSDK Administrator's Manual

Step 5. Configure Basic Settings and start the wireless
network
Provide a minimal set of configuration information by defining the basic settings for your wireless network.
These settings are all available on the Basic Settings page of the Web User Interface, and are categorized
into steps 1-4 on the Web page.
For a detailed description of these Basic Settings and how to properly configure them, please see "Basic
Settings" on page 35. Summarized briefly, the steps are:
1. Review Description of this Access Point.
Provide IP addressing information. For more information, see "Review / Describe the Access Point" on
page 37.
2. Provide Network Settings.
Professional Access Point
Setting Up and Launching Your Wireless Network - 31
Administrator Guide