Usb 2.0 Wafer Connector (Cn5); Smbus Connector (Cn6) - AXIOMTEK eBOX100-51R-FL Series User Manual

3.3.2

USB 2.0 Wafer Connector (CN5)

The Universal Serial Bus (compliant with USB 2.0 (480Mbps)) connector is
connected via cable from internal USB wafer connector (CN5). This is a 2x5-pin cut
pin 9 (pitch=2.0mm) wafer connector, which is compliant with Hirose DF11-10DP-
2DSA, for installing versatile USB 2.0 compliant interface peripherals.
Pin Signal
1 +5V_SBY
3 USB #3_D-
5 USB #3_D+
7 GND
3.3.3

SMBus Connector (CN6)

This is a 3-pin (pitch=1.25mm) connector for SMBus interface which is compatible with I
Pin Signal
1 CLK_SBY
2 DAT_SBY
3 GND
Jumper & Connector Settings
Pin Signal
2 +5V_SBY
4 USB #4_D-
6 USB #4_D+
8 GND
eBOX100-51R-FL Series user's Manual
1
2
C.
23