Avaya S8700 Series Manual page 140

Migrating from an S8500 Media Server to S8710 Media Server
On the active S8710 Media Server:
Note:
This media server becomes media server 1.
Note:
!
CAUTION:
For the next step, do not connect the S8710 Media Server control network
CAUTION:
cables to the Ethernet switch.
1. Powering up both media servers
2. Accessing the media server
3. Setting up Telnet (if necessary)
4. Installing Communication Manager
5. Accessing the media server
6. Configuring both media servers using AIW
On the S8710 Media Servers:
1. Connecting customer LAN cables
2. Restoring the translations
3. Pre-testing the system
On the S8500 Media Server:
Note:
Call processing will be blocked until the S8710 Media Servers take over. This will
Note:
create an approximate 5 minute outage.
1. Disconnecting the S8500 Media Server from the customer network
On the S8710 Media Servers:
1. Connecting the S8710 Media Servers to the control network
On the S8500 Media Server:
1. Shutting down the S8500 Media Server
2. Disconnecting the cables
140 Migrating to the Avaya S8700 Media Server
on page 143
on page 143
on page 144
on page 145
on page 147
on page 147
on page 147
on page 148
on page 148
on page 151
on page 151
on page 150
on page 150