Avaya S8700 Series Manual page 175

To configure the network parameters:
1. Under Server Configuration, click Configure Server to open the first page (Select server
type) of the Configure Server process.
2. Select the appropriate server type and click Continue.
3. Click Continue through the Review Notices to get to the Specify how you want to use
this wizard page.
4. Select Configure individual services and click Continue.
5. Click Set Identities from the main menu.
6. On the Set Server Identities window:
Populate the Host Name fields
In the This is server field, select 1
Assign the Ethernet ports and click Continue
7. In the Configure Ethernet Interfaces window, fill in the correct IP addresses, Gateway,
and Subnet mask (or use the default addresses) for the Ethernet port connected to the
customer LAN and select AUTOSENSE for the speed.
S8710 IP: Eth 0
S8710 MC: Eth 4
Click Change to update and reboot the media server. When the screen displays
Successfully configured ethernet interfaces.
The Ethernet ports are configured.
8. Click Close Window to close the Configure Server wizard and go to
to the network server on page 176.
On first S8710 Media Server
Verifying connectivity
Issue 4 January 2005 175