From A Pcmcia Flash Card - Avaya S8700 Series Manual

Connecting to the standby media server
S8700 only
1. Connect to the Services port on the back of the standby media server.
2. Launch a Web browser.
3. Log in as craft or dadmin.
4. Click Launch Maintenance Web Pages.
5. Under Server, click Release Server.
6. Click Release.
S8700 or S8710
Disconnecting from the standby media server
1. Unplug the laptop from the Services port on the back of the standby media server.
Connecting to the active media server
S8700 or S8710
1. Connect to the Services port on the back of the active media server.
2. Open a SAT session using Native Configuration Manager or Avaya Site Administration.
3. Login as craft or dadmin.
Installing the translations
1. Type reset system 4 and press Enter.
To add the IPSI translations before saving translations, go to
Communication Manager

From a PCMCIA flash card

Note:
The PCMCIA flash card is used only with the S8700 Media Server.
Note:
Make sure you have the PCMCIA with the translations from Avaya's Software Technical Support
(STS) group.
on page 51.
Migrating translations
Adding IPSI translations to
Issue 4 January 2005 45