Chapter 2 Install Your Product; Plug In Signals; Plug In Main Power - RGBlink FLEX 16 User Manual

Chapter 2 Install Your Product

2.1 Plug in Signals

Connect signals to the product (ensure all devices are powered off first). Tighten
connector screws/locks where provided.Connect to XPOSE software by CAT5 cable.
RGBlink provides a network cable for this connection, as a standard accessories.
Please check in the package for this cable.

2.2 Plug in Main Power

Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.
The power indicator on front panel lights.
FLEX 16 User Manual
11