Wireless Controller Display - Rinnai Symmetry RDV3611 Operation Manual

Wireless controller display

Temperature display
Displays the current room
temperature.
Set temperature indicator
When the controller is on, the
programmed temperature will
only be displayed. In flame
mode, only the flame setting
(F1-F7) will display.
Time of day and day of week
Operation mode indicator
When in flame mode, the
display will be blank.
Mode button
Toggles between automatic,
manual, and flame modes.
T - Time
Indicates the time and day of the
week programming. Press and hold
for two seconds.
Transmit indicator
Indicates the controller is transmitting.
UP
OK
A/M T P
DOWN
UP, OK, DOWN
UP/DOWN changes hours, minutes or temperature.
OK accepts the current function and advances to the
next function
Battery indicator
Symbol will flash when the
batteries need replacing.
The controller will function
approx. five days before
shutting off.
Flame indicator
Indicates flame height.
When in manual or
automatic modes, the fire
will switch off if the room
temperature reaches the
set temperature. When this
occurs the flame indicator
will rise and fall every few
seconds to indicate the fire
is still on.
PWR button
PWR and OK pressed
PWR
together switches the
controller on. PWR switches
the controller off.
Symmetry RDV3611 operation guide: 11158-C 03-20 | 9