Wireless Controller - Rinnai Symmetry RDV3611 Operation Manual

Wireless controller

Your wireless controller is designed to be wall mounted on a bracket,
supplied with the controller, within 10 m of the fire.
How it operates
The controller houses the thermostat that senses the room temperature
and communicates information back to the fire via radio frequency.
The controller needs to be positioned in the same room as the fire and area that needs heating—a
place without temperature fluctuations. For example, if placed near a door subject to cold drafts,
the controller will sense the room temperature is colder than it is and the fire will keep heating the
room, when in reality the set temperature has been reached.
Controller position
The ideal position for the controller is:
• Away from possible drafts in the room
• Away from direct sunlight
• A suitable distance away from the fire, approx. 2-10 m
• Ideally 1.5 m from the floor (approx. chest height when standing)
Battery
Type: 2 x AA batteries
Life: Approx. 12 months
When the batteries are changed all settings will be lost and the controller will revert back to the
initial setup screen.
Handy tips
The most efficient way of operating your Symmetry is with the wireless controller. Once the fire has
been turned on at the wall for the first time, and the On/Off button pressed on the control panel,
use the controller to turn the unit on and off (not the button on the fire).
If you turn the appliance off using the control panel, you will need to turn it on again using the
control panel—you won't be able to turn it on with the controller.
If the fire is not going and the LED on the control panel is permanently on, push the On/Off button
next to the LED twice to get the appliance to reignite.
If the LED on the fire is off, check the flame symbol on the controller. If it is pulsing, the fire is still
on and will relight when the room temperature drops.
8 | Symmetry RDV3611 operation guide: 11158-C 03-20