Instaview - LG GF-V910MBL Owner's Manual

• When refitting the ice bin, ensure that it is placed
correctly. If it is tilted or unlevel, it may not
continue to make ice due to sensor disruption.
Turning the Automatic
Icemaker On or Off
To turn the automatic icemaker On/Off, press the
power switch on the icemaker to the ON ( | ) or OFF
(O) position.
Normal Sounds You May Hear
The icemaker water valve will buzz as the icemaker
fills with water. If the power switch is in the ON (|)
position, it will buzz even if it has not yet been
hooked up to water. To stop the buzzing, move the
power switch to OFF (O).
NOTE
• Do not keep the power turned on to the
icemaker if the water line is not connected.
Doing so can damage the icemaker.
Preparing for Vacation
If the ambient temperature will drop below
freezing, have a qualified technician drain the
water supply system to prevent serious property
damage due to flooding caused by ruptured water
lines or connections. Set the icemaker power
switch to OFF (O) and shut off the water supply to
the appliance.
NOTE
• The ice bin should be emptied any time the
icemaker on/off switch is turned to the OFF (O)
position.

InstaView

This feature is only available on some models.
Using the InstaView Door in
Door
The InstaView Door in Door lets you see if you're
running low on frequently used items like
beverages and snacks, without opening the fridge
door.
1
Knock twice on the glass to turn the LED light
inside the Door in Door on or off.
2
The LED light turns off automatically after ten
seconds.
CAUTION
• Do not open the door of the appliance with the
door in door open, or do not open the door in
door while the door of the appliance is open. The
door in door may be struck by the edge of the
appliance and damaged.
NOTE
• The InstaView Door in Door function is disabled
for 2 seconds after closing the left or right
freezer door.
• Knock near the center of the glass. Knocking
near the edges of the glass may not activate the
InstaView Door in Door function.
OPERATION 29 EN